Cabinet KKSB Raspberry Pi Case Model 3 B, Aluminum Gray
Kun 3 stk. igjen på lager
Leveringstid er normalt 2-4 virkedager
- Bestill på nett: Betal med Vipps, kortbetaling eller faktura (EHF-faktura for skoler og bedrifter)
- Bestill via telefon: Ring 35 60 02 01 (man-fre 9-15)
- Bestill via e-post: firstname.lastname@example.org
This Raspberry Pi case includes an exit slot in the side of the case allowing a ribbon cable to be fitted to the board’s 40pin GPIO header. The board is clamped with two hexagonal standoffs and the lid is attached to these standoffs and with countersunk hex screws.
This Raspberry Pi Case keeps the board fixed with the hexagon standoffs to the bottom part. Assembled the aluminum case is robust and protect the board from damage.
The case has also cut outs for the Raspberry Pi camera module. There are good possibilities for mounting heat sinks. On the top part there is several slots to create an air flow in order to cool down the board and let WiFi signals out. The case is compactly designed after the shape of the Raspberry Pi Board and the sheet metal construction also makes is even slimmer.
There is two hole in the bottom part that enables the case to be wall mounted.
No special skills is required to assemble the case and the screws and standoffs should be fastened with low force with the wrench included.
Raspberry Pi Case lid & bottom
4 pcs Countersunk Hex Screws
2 pcs Hexagonal Standoffs
1 pcs Wrench