translation missing: nb.general.accessibility.skip_to_content
Grunnet ferieavvikling vil det være lenger leveringstid på ordre i Juli. Telefonen vår er også stengt. God sommer!
Lengre leveringstid og stengt telefon i Juli grunnet ferieavvikling. God sommer!

Raspberry Pi Compute Module 3 Development Kit

Eks. mva: 1.359 kr
Ink. mva: 
1.699 kr

Bestillingsvare. Bestilles ved ordre.
Leveringstid er normalt 2-6 uker

Produsentens varenr: RPI-COMPUTE3-KIT
  • Bestill på nett: Betal med Vipps, kortbetaling eller faktura (EHF-faktura for skoler og bedrifter)
  • Bestill via telefon: Ring 35 60 02 01 (man-fre 9-15)
  • Bestill via e-post:
This is the main development kit I/O board into which the Compute Module SODIMM board is connected. It also contains all of the necessary interface ports to allow an engineer to design and test their own prototype application. The modules simplify the design process engineers need to undertake when developing a System on Module (SoM) solution into their final product. Engineers do not need to concern themselves with the complexities of interfacing with the BCM2837 processor directly and instead can concentrate on designing the interfaces to their own I/O board and their application software . This simplicity fosters rapid development. A Raspberry Pi Compute Module I/O Board Camera Display Adaptor is included in the kit to connect a standard Raspberry Pi camera board or Raspberry Pi display to the Compute Module I/O Board. The I/O board contains the following interfaces: 

- Multiple GPIO interfaces on 2 60 way 0.1" Headers 
- 1 x Micro USB connector type B - USB Slave 
- 1 x USB connector type A - USB Host 
- 2 x CSI ports for camera boards 
- 2 x DSI ports for display boards 
- Full size HDMI port 
- Micro USB power connector 
- Micro SD connector 
- SOFTWARE - ARMv7 Instruction Set, and a mature and stable Linux software stack